S80-1-02機床減振螺栓適用范圍：
壓力機、數控機床、汽車等。
Apllication：
Forcing presses、nc machines、auto and ect.

S80-1-02機床減振螺栓產品特點：
1.減振螺栓利用減振橡膠和螺栓，螺母的結合，在動力源及相連部件之間有效衰減振動，隔離振動。
2.防止因疊加頻率，頻率相近而產生的振動力放大，改善機械的動態條件。
Product Character:
1. Circular mounts make use of the combination of rubber together with bolts and nuts to reduce and isolate vibration between power source and relating parts.
2. Prevent from enlarging vibration resulting from piling up frequency and close frequency. Improve mechanical dynamic condition.

S80-1系列如何選擇：
1.確定使用時，減振螺栓橡膠受力方向（剪切、壓縮、壓縮/剪切）。
2.以連接部件的重量及連接點數量，確定所需承載力。
3.振動力較大或旋轉部件的連接應增加1.5倍的承載力。
4.按參數表選擇，確認螺栓、螺紋直徑、長度是否符合。
How to choose：
1. Decide the direction of load （shear, depress, depress/shear）
2. Confirm the load according to the weight and quantity of connecting parts.
3. 1.5 times load should be used for spinning parts and large vibration.
4. Inspect if the diameter and length of bolts accord with this chart.

S80-1系列技術參數及選用表：
Specification and chart for choice: